1/2" to 2" Normally Closed 220V 12V 24V IP65 Waterproof Solenoid Valve 2-Wire Brass Motorized Electric Ball Valve for Water Oil

1/2" to 2" Normally Closed 220V 12V 24V IP65 Waterproof Solenoid Valve 2-Wire Brass Motorized Electric Ball Valve for Water Oil

Normally Closed / AC220 / 1"
Dhs. 144.90
Skip to product information
1/2" to 2" Normally Closed 220V 12V 24V IP65 Waterproof Solenoid Valve 2-Wire Brass Motorized Electric Ball Valve for Water Oil

1/2" to 2" Normally Closed 220V 12V 24V IP65 Waterproof Solenoid Valve 2-Wire Brass Motorized Electric Ball Valve for Water Oil

Dhs. 144.90
Wiring Control
Voltage
Specification

SPECIFICATIONS

Actuator Mode: Without Manual And Instruction

Brand Name: AICANTEK

Certification: None

Choice: yes

High-concerned chemical: None

Is Smart Device: Yes

Material: Brass

Media: Water

Model Number: Electric ball valve

NC or NO: Normally Closed

Origin: Mainland China

Port Size: DN15,DN20,DN25,DN40,DN50

Power: Solenoid

Power Source: AC

Pressure: Low Pressure

Standard or Nonstandard: Standard

Structure: Ball

Temperature of Media: Normal Temperature

Specification

Medium: Cold/hot water, 60% Ethylene Glycol
Material: Brass
Power Supply: AC220V/DC12V/DC24V
Structure Forms: Two Ways,
Operation Mode: Three Wire Two Ways Control
/Three-wire One Control mode/2-wire, (power-off reset mode)
Power: 6W (Only when the valves open and close)
Running Time: 5-15 Seconds
Nominal Pressure: 1.6MPa
Medium Temperature: 2°~95°
Maximum Differential Pressure: 1.0MPa
Connection Mode: G Internal Thread

Torque:220V 8 N.M, DC12/24V 6 N.M

Waterproof level:IP65

Package list:1PC* Ball Valve

CR04: 2-wire, (power-off reset mode) wiring diagram
Voltage: DC12V, DC24V, AC220V
Remarks: POWER is an outside connect working power supply, and a farad capacitor is used internally as a backup power supply. The charging time is fast, and it can work in occasions with high switching frequency.
1. SW is connected with OPEN, the valve is opened, and the internal power is automatically cut off when it is in place, and the valve remains in the open state.
2. The SW is connected with CLOSE, the valve is closed, and the internal power is automatically cut off when it is in place, and the valve is kept in the closed state.




You may also like